clean up adding user vs changing role logic:
- when adding user, ensure user doesn't exist
- when changing roles, ensure user does exist
add test for changing roles of existing user
Fixes#1821
- ensure max_crawler_memory_size is inited before it is set!
- pass profile_browser_memory / profile_browser_cpu from chart values
- map volume to /tmp/home to avoid persisting /tmp for profiles
Fixes https://github.com/webrecorder/browsertrix/issues/1743
On the backend, support adding user to new org and improved error
messaging:
- if user exists is not part of the org to be added to, add user to the
registration org, return 201
- if user is already part of the org, return 400 with
'user_already_is_org_member' error
- if user is not being added to a new org but already exists, return
'user_already_exists'
frontend:
- if user user same password, they will just be logged in and added to
registration org (same as before)
- if user uses wrong password, show alert message
- handle both user_already_is_org_member and user_already_registered
with alert message and link to log-in page.
note: this means existing user is added to the registration org even if
they provide wrong password, but they won't be able
to login until they use correct password/reset/etc...
Adds a `max_crawler_memory` chart setting, which, if set, will
defines the upper crawler memory limit that crawler pods can be resized up to.
If not set, auto resizing is disabled and pods are always set to 'crawler_memory' memory
if 'registration_enabled' is set, check 'registration_org_id' for org id
of an existing org that new users should be added to when they register.
if omitted, default to the default org
Fixes#1729
To support #1683, it would be useful to be able to sort by 'last QA
start time' in addition to/instead of last QA state.
- make sorting consistent with workflow sorting
- sortBy fields renamed to lastQAState and lastQAStarted
- Current QA runs are now included in the lastQAState/lastQAStarted fields, rather than being separated out to different values
---------
Co-authored-by: Tessa Walsh <tessa@bitarchivist.net>
Repository Index: Generate an index.yaml in ./docx/helm-repo/index.yaml
to allow for browsertrix to be a helm repository.
docs: rename docs.browsertrix.cloud -> docs.browsertrix.com
docs: update deployment doc to mention helm repo as preferred way to
install
docs build action: generate repository index in GH action
publish action: update auto-generated message to mention installing from
the repo.
---------
Co-authored-by: Tessa Walsh <tessa@bitarchivist.net>
As additional support for #1683, include the active QA stats in the
crawl response, along with active QA state.
This will allow showing progress of QA run in the archived items list.
Fixes#1659
Takes an arbitrary set of thresholds for text and screenshot matches as
a comma-separated list of floats.
Returns a list of groupings for each that include the lower boundary and
count for all thresholds passed in.
- fixes#1684
- can be used to optionally restrict QA to only some crawls (eg. with
browsertrix-crawler>=1.0.0)
- enforce error on backend (return 400) and handle special error on the
frontend
Backend work for #1672
Adds new sort options to /crawls and /all-crawls GET list endpoints:
- `reviewStatus`
- `qaRunCount`: number of completed QA runs for crawl (also added to
CrawlOut)
- `qaState` (sorts by `activeQAState` first, then `lastQAState`, both of
which are added to CrawlOut)
- Remove globals from profile, uploads, and qa test modules in favor of fixtures
- Add retries to fix intermittent test failures due to timing
---------
Co-authored-by: Tessa Walsh <tessa@bitarchivist.net>
Co-authored-by: Ilya Kreymer <ikreymer@gmail.com>
- priority classes <-10 are ignored by cluster-autoscaler so QA jobs
with too low priorities never run
- start crawl priorities at 0 going down (same as before)
- start qa run priorities at -2 going down (instead of -100)
- this means a crawl of with scale of 3 can be preempted by 1st qa pod,
but otherwise crawls have higher priority
- rename priority classes as they are otherwise immutable and error on
helm upgrade
This allows for more room in lower pri classes for other type of
objects, while keeping in mind the -10 and below threshold: (see:
https://github.com/kubernetes/autoscaler/blob/master/cluster-autoscaler/FAQ.md)
Fixes#1670
No longer need to pass pages to the ConfigMap. The ConfigMap has a size
limit and will fail if there are too many pages.
With this change, the page list for QA will be read directly from the
WACZ files pages.jsonl / extraPages.jsonl entries.
Fixes#1648
- Tracks failed QA runs in database, not only successful ones
- Includes failed QA runs in list endpoint by default
- Adds `skipFailed` param to list endpoint to return only successful
runs
---------
Co-authored-by: Ilya Kreymer <ikreymer@gmail.com>
QA Details page:
- Enables QA tab with ability to start automated analysis QA Run + view a and manual review status
- Pages listed with review status + overall crawl review status shown on QA details (relates to #1508)
- Initial placeholder for QA run analytics (part of #1589)
- Addresses a good deal of #1477
Automated Analysis QA in Review Mode:
- Ability to select from multiple analysis QA runs / view QA runs in QA details
- Shows analysis screenshot, text and resources compare and replay tabs (fixes#1496)
- Sorting by worst screenshot / worst text score for each QA run
- Includes pages sidebar with screenshot/text/resource compare results (fixes#1497)
Manual Review QA in Review Mode:
- Per-page replay available as separate tab (fixes#1499)
- Supports thumbs up, thumbs down, notes for each page
- Supports entering review status approval (good/acceptable/bad can be entered when finishing review
---------
Co-authored-by: Emma Segal-Grossman <hi@emma.cafe>
Co-authored-by: Ilya Kreymer <ikreymer@gmail.com>
Co-authored-by: Henry Wilkinson <henry@wilkinson.graphics>
- increase time for going to waiting_capacity from starting to 150
seconds
- relax requirement for state transitions, allow complete from waiting
- additional type safety for different states, ensure mark_finished()
only called with non-running states, add `Literal` types for all the
state types.
- set memory limit to 1.2x memory request to provide extra padding and
avoid OOM
- attempt to resize crawler pods by 1.2x when exceeding 90% of available
memory
- do a 'soft OOM' (send extra SIGTERM) to pod when reaching 100% of
requested memory, resulting in faster graceful restart, but avoiding a
system-instant OOM Kill
- Fixes#1632
---------
Co-authored-by: Tessa Walsh <tessa@bitarchivist.net>
Fixes#1617
Filters added:
- reviewed: filter by page has approval or at least one note (true) or
neither (false)
- approved: filter by approval value (accepts list of strings,
comma-separated, each of which are coerced into True, False, or None, or
ignored if they are invalid values)
- hasNotes: filter by has at least one note (true) or not (false)
Tests have also been added to ensure that results are as expected.
Fixes#1620
This increases the total timeout from 60 seconds to 120 seconds for
crawl to complete, which should be sufficient given how intermittently
the failure has been happening. Can increase it further if needed.
Supports running QA Runs via the QA API!
Builds on top of the `issue-1498-crawl-qa-backend-support` branch, fixes
#1498
Also requires the latest Browsertrix Crawler 1.1.0+ (from
webrecorder/browsertrix-crawler#469 branch)
Notable changes:
- QARun objects contain info about QA runs, which are crawls
performed on data loaded from existing crawls.
- Various crawl db operations can be performed on either the crawl or
`qa.` object, and core crawl fields have been moved to CoreCrawlable.
- While running,`QARun` data stored in a single `qa` object, while
finished qa runs are added to `qaFinished` dictionary on the Crawl. The
QA list API returns data from the finished list, sorted by most recent
first.
- Includes additional type fixes / type safety, especially around
BaseCrawl / Crawl / UploadedCrawl functionality, also creating specific
get_upload(), get_basecrawl(), get_crawl() getters for internal use and
get_crawl_out() for API
- Support filtering and sorting pages via `qaFilterBy` (screenshotMatch, textMatch)
along with `gt`, `lt`, `gte`, `lte` params to return pages based on QA results.
---------
Co-authored-by: Tessa Walsh <tessa@bitarchivist.net>
Fixes#1597
New endpoints (replacing old migration) to re-add crawl pages to db from
WACZs.
After a few implementation attempts, we settled on using
[remotezip](https://github.com/gtsystem/python-remotezip) to handle
parsing of the zip files and streaming their contents line-by-line for
pages. I've also modified the sync log streaming to use remotezip as
well, which allows us to remove our own zip module and let remotezip
handle the complexity of parsing zip files.
Database inserts for pages from WACZs are batched 100 at a time to help
speed up the endpoint, and the task is kicked off using
asyncio.create_task so as not to block before giving a response.
StorageOps now contains a method for streaming the bytes of any file in
a remote WACZ, requiring only the presigned URL for the WACZ and the
name of the file to stream.
- instead of overriding the content-type header globally, pass
'application/merge-patch+json' to
self.custom_api.patch_namespaced_custom_object() directly
- bump kubernetes-asyncio to 29.0.0
- fixes potential issues with global override of the header in
kubernetes-asyncio
- copy of #1602 for main
- Backend: Use separate resource constraints for profiles: default
profile browser resources to either 'profile_browser_cpu' /
'profile_browser_memory' or single browser 'crawler_memory_base' /
'crawler_cpu_base', instead of scaled to the number of browser workers
- Frontend: check that profile html page is loading, keep retrying if
still getting nginx error instead of loading an iframe with the error.
Fixes#1598 (Copy of #1599 from 1.9.4)
I came across [this
problem](https://forum.webrecorder.net/t/deleting-crawl-failure/512) and
noticed that the access URL is used when deleting files, causing my file
deletions to fail on OpenStack SWIFT S3 (relates to #1090). This trivial
change makes it work there.
Allow maximum scale option to be fully configurable via
`max_crawl_scale`. Already configurable on the backend, and now exposed
to the frontend via API `/api/settings` `maxCrawlScale` value.
The workflow editor and workflow details are updated to allow selecting
the scale up to the maxCrawlScale setting (which defaults to 3 if not
set).
